TL FWD V6-3.5L (2009)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Disassembly
Intermediate Shaft Disassembly
Special Tools Required
-
Support base attachment 07LAF-SM40300
-
Support base 07965-SD90100
-
Attachment, 42 x 47 mm 07746-0010300
-
Driver handle, 15 x 135L 07749-0010000
1. Remove the heat shield (A).
2. Remove the outer seal (A) and the external snap ring (B) from the intermediate shaft (C).
3. Press the intermediate shaft (A) out of the intermediate shaft bearing (B) using the support base attachment (C), the support base (D), and a press.
Be careful not to damage the bearing support ring (E) on the intermediate shaft during disassembly.
4. Remove the internal snap ring (A) from the bearing support (B).
