TL FWD V6-3.5L (2009)
Axle Shaft Assembly: Overhaul
Intermediate Shaft Reassembly
Intermediate Shaft Reassembly
Exploded View
Special Tools Required
-
Attachment, 40 x 50 mm 07LAD-PW50601
-
Support base attachment 07LAF-SM40300
-
Support base 07965-SD90100
-
Attachment, 52 x 55 mm 07746-0010400
-
Driver handle, 15 x 135L 07749-0010000
-
Fork seal driver, 39.2 x 49.5 x 15 mm 07947-4630100
NOTE: Refer to the Exploded View, as needed, during this procedure.
1. Clean the disassembled parts with solvent, and dry them with compressed air.
NOTE: Do not wash the rubber parts with solvent.
2. Press a new intermediate shaft bearing (A) into the bearing support (B) using the 15 x 135L driver handle (C), the 52 x 55 mm attachment (D), the
support base attachment (E), the support base (F), and a press.