TL FWD V6-3.5L (2009)
Rear Door Window Regulator: Service and Repair
Rear Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Remove the door panel. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Panel
Removal/Installation
2. Raise the glass fully.
3. Remove the screws, then remove the door panel bracket (A).
4. Disconnect the power door lock actuator connector (A), and detach the harness clip (B). Remove the plug caps (C).
5. Pass the wire harness (D) through the slits (E) in the plastic cover (F), then remove the plastic cover.
NOTE: If the plastic cover is damaged or torn, replace it.
6. Detach the harness clip (A). Remove the bolts, and release the hook (B), then remove the door panel bracket (C).
7. Remove the door pad. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair/Rear Door Pad
Replacement
