TSX L4-2.4L (2005)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation
Special Tools Required
-
KTC trim tool set SOJATP2014*
-
Trim pad remover, Snap-on A 177A or equivalent, commercially available
*
Available through the American Honda Tool and Equipment Program; call 888-424-6857
NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
1. Lower the glass fully.
2. Using a trim tool, push on the rear hook (A) and pivot the cover (B) on the front hook (C), then remove the cover and the screws securing the inner
handle (D).
