TSX L4-2.4L (2005)
11. If necessary, remove the inner handle (A).
1. Carefully peel the edge of the insulator (B) from the back of the door panel as needed.
2. Remove the screws (C), then remove the door panel trim (D).
3. Remove the screws (E) ('04-05 models) or (F) ('06-07 models) from the front of the door panel, then remove the inner handle.
12. Install the door panel in the reverse order of removal, and note these items:
-
Check for damaged or stress-whitened clips, and replace them with new ones.
-
Make sure the connectors are plugged in properly, and the cable and the bulb socket are connected properly.
-
Make sure the window and power door lock operate properly.
-
Driver's: Perform the power window control unit reset procedure.
