TSX L4-2.4L (2005)
Console: Removal and Replacement
Center Console Removal/Installation
Center Console Removal/Installation
Special Tools Required
KTC trim tool set SOJATP2014*
*
Available through the American Honda Tool and Equipment Program; call 888-424-6857
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when prying components
-
Take care not to scratch the front seat, dashboard, and related parts.
1. M/T model Loosen the locknut (A) to remove the shift knob (B).
2. Starting towards the front of the vehicle detach the clips by pulling the center console panel (A) up If equipped, disconnect the seat heater switch
connectors (B)
