acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Brake Pad:|07-021|Page 5400 > < Customer Interest for Brake Pad:|07-021|Page 5397
Page 1
background image

Brake Pad: All Technical Service Bulletins
Brakes - Front Brake Juddering Condition

07-021

May 28, 2010

Applies To: 
2004-07 TSX - ALL
2004-07 TSX: Front Brakes Judder

(Supersedes 07-021, dated April 27, 2010, to revise the information marked by the black bars and asterisks)

REVISION SUMMARY

Under WARRANTY CLAIM IN FORMATION, the flat rate time was revised after the operation was reviewed and validated.

SYMPTOM

The driver feels a vibration through the steering wheel when the brakes are applied normally.

PROBABLE CAUSE

The front brake pads have worn the discs unevenly.

CORRECTIVE ACTION

Refinish the front brake discs, and install new front brake pads.

PARTS INFORMATION

Front Pad Set: P/N 45022-SEC-A00

WARRANTY CLAIM INFORMATION

The normal warranty applies.

Operation Number:

410820

Resurface both front brake discs with on-car lathe (includes pad replacement).

*Flat Rate Time:

0.9 hour*

Failed Part:

P/N 45022-SEA-J11

Defect Code:

00401

Symptom Code:

03502

Skill Level:

Repair Technician

REPAIR PROCEDURE

1. Remove the front brake pads:

^

Refer to page 19-11 of the 04-07 TSX Service Manual, or

^

Online, enter keyword PAD, and select Front

Brake Pad Inspection and Replacement from the list.

2. Inspect the front brake discs (see page 19-14 of the service manual). (Online, use the keyword FRONT DISC, and select Front Brake Disc Inspection

from the list.)

^

If the discs are within the service limits, go to step 3.

All Technical Service Bulletins for Brake Pad:|07-021|Page 5400 > < Customer Interest for Brake Pad:|07-021|Page 5397