TSX L4-2.4L (2005)
7. Install the cam chain guide B.
8. Remove the pin or lock pin (P/N 14511-PNA-003) from the auto-tensioner,
9. Check the chain case oil seal for damage. If the oil seal is damaged, replace the chain case oil seal.
10. Remove all of the old liquid gasket from the chain case mating surfaces, bolts, and bolt holes.
11. Clean and dry the chain case mating surfaces.
12. Apply liquid gasket, P/N 08717-0004, 08718-0001, 08718-0003, or 08718-0009, evenly to the engine block mating surface of the chain case and
to the bolt threads.
13. Apply liquid gasket to the engine block upper surface-contact areas (A) on the chain case and lower block upper surface contact areas (B) on the
chain case.
