TSX L4-2.4L (2005)
14. Apply liquid gasket, P/N 08718-0001 or 08718-0009, evenly to the oil pan mating surface of the chain case and to the bolt threads.
NOTE: Do not install the parts if 4 minutes or more have elapsed since applying liquid gasket. Instead, reapply liquid gasket after removing the
old residue.
15. Install-the new O-ring (A) on the chain case. Set the edge of the chain case (B) to the edge of the oil pan (C), then install the chain case on the
engine block (D). Wipe off all of the excess liquid gasket on the oil pan and chain case mating. area.
NOTE:
^
When installing the chain. case, do not slide the bottom surface on the oil pan mounting surface.
^
Wait at least 30 minutes before filling the engine with oil.
^
Do not run the engine within 3 hours after installing the chain case.
