TSX L4-2.4L (2005)
6. Remove the center anchor bolt (A), and detach the harness clip (B), then remove the seat belt buckle (C).
NOTE: The 4-way power seat is symmetrical to the 8-way power seat,
7. Pull the seat belt switch harness (D) out through the space between the seat cushion and the seat linkage, or the hole in the seat track.
8. Install the buckle in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the center anchor bolt before reinstallation.
-
Assemble the washers on the center anchor bolt as shown.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft codes for the radio and the navigation system, then enter the customer's radio station presets.
-
Reset the clock.
9. Move the seat all the way forward and backward, and confirm that the seat buckle harness is routed properly.
