TSX L4-2.4L (2005)
2. Remove the center anchor bolts (A), and remove the seat belt buckles (B).
3. Remove the rear shelf.
4. Remove the retractor mounting self-tapping ET screw (A) and the retractor bolt (B), then remove the center seat belt (C) and retractor (D).
5. Remove the protector (A).
6. Install the seat belt and buckles in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the center anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers on the center anchor bolt as shown.
-
Before installing the center anchor bolt, make sure there are no twists or kinks in the center belt.
