TSX L4-2.4L (2005)
84. Position the cutout on the mounting cushion as shown, then install it on the cylinder of the gearbox securely.
85. Reinstall the gearbox mounting bracket over the mounting cushion, and loosely install the two flange bolts.
86. Reinstall the steering stiffener plate and the gearbox mounting bolts on the left side of the gearbox, and torque them to 59 N.m (43 lb-ft).
87. Torque the flange bolts on the right side of the gearbox alternately, in two or more steps, to 59 N.m (43 lb-ft).
88. Loosely connect the inlet and the return lines by hand.
