TSX L4-2.4L (2005)
89. Reinstall the inlet line holder and the return hose on the gearbox mounted bracket.
90. Reinstall the inlet line holder on the front suspension subframe. Make sure that there is no interference between any other parts and the inlet and the
return lines.
91. Torque the return line flare nut to 28 N.m (21 lb-ft).
92. Torque the inlet line flare nut to 42 N.m (31 lb-ft).
93. Raise the jack supporting the front suspension subframe.
94. Reinstall the front suspension subframe rear bracket. Torque the new 12 mm flange bolt to 93 N.m (69 lb-ft) and the 14 mm special bolt to 103 N.m
(76 lb.ft).
