TSX L4-2.4L (2005)
95. Reinstall the front suspension subframe front bracket. Torque the new 12 mm flange bolt to 54 N.m (40 lb-ft), and the 14 mm special bolt to 103
N.m (76 lb-ft).
96. Torque the new front suspension subframe left mid mount bolts to 49 N.m (36 lb-ft) and the mount bolt to 44 N.m (33 lb.ft).
97. Torque the new front suspension subframe right mid mount bolts to 49 N.m (36 lb-ft).
98. Reinstall the splash shield.
99. Reinstall the power steering heat shield.
100. Wipe off any grease contamination from the ball joint tapered section and threads. Reconnect the tie-rod ball joints to the knuckles.
101. Install the tie-rod end ball joint nut, and torque it to 43 N.m (32 lb.ft). Insert a new cotter pin, and bend it.
102. Remove the engine hanger adapter and the engine support hanger.
