ZDX V6-3.7L (2010)
Rear Vision Camera: Service and Repair
Rearview Camera Removal/Installation
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the tailgate and related parts.
1. Remove these items:
-
Tailgate trim panel
-
Tailgate lower trim
-
Inner taillights See: Lighting and Horns/Tail Lamp/Service and Repair/Inner Taillight Replacement
2. Disconnect the rearview camera 16P connector (A), and remove the nuts (B).
3. Pull the rear license trim (A) away from the tailgate, then remove the grommet (B) from the tailgate, and carefully pull the connector through the
hole in the tailgate.
4. From behind the rear license trim, disconnect the connector (A), and remove the self-tapping screws.