ZDX V6-3.7L (2010)
13. Remove the rod fastener (A) from the outer handle base (B), then replace it with a new one.
14. Install the outer handle in the reverse order of removal, and note these items:
-
Reinstall the lock cylinder (driver's door) or the outer handle holder (passenger's door) before installing the outer handle cover.
-
Make sure the connector is plugged in properly.
-
The lock cylinder cable (driver's door) and the outer handle rod are connected securely.
-
Make sure the door key cylinder/door lock operates properly.
-
Make sure the door handle operates properly.
-
When reinstalling the door panel, make sure the plastic cover on the door is installed properly.
-
Push the clips and the hooks into place securely.