ZDX V6-3.7L (2010)
Front Door Panel: Service and Repair
Front Door Panel Removal/Installation
Front Door Panel Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
-
Trim Pad Remover Snap-on A 177A or equivalent, commercially available
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Take care not to scratch the door or the related parts.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the door mirror cover See: Mirrors/Service and Repair/Power Mirror Replacement.
2. Push on the bottom of the inner handle cap (A) while pushing on the upper hook (B) with the appropriate trim tool, then pull back the cap and
release the hooks (C) to remove it.
3. Remove the screws securing the inner handle (A).
4. Pry out at the notch (A) with the appropriate trim tool, and remove the cap (B).