ZDX V6-3.7L (2010)
Front Door Window Regulator: Service and Repair
Front Door Glass and Regulator Replacement
NOTE: Put on gloves to protect your hands.
1. Raise the glass fully.
2. Remove these items:
-
Door panel See: Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
-
Inner handle See: Front Door Panel/Service and Repair/Front Door Panel Removal/Installation
3. Remove the plastic cover (A).
1. Disconnect the power door lock actuator connector (B).
2. Remove the plug caps (C).
3. Pass the wire harnesses (D) and the cables (E) through the slits (F) in the plastic cover, then remove the plastic cover.
NOTE: If the plastic cover is damaged or torn, replace it with a new one.
4. Lower the glass (A) until you can see the bolts, then remove them. Carefully pull out the glass through the window slot.
NOTE: Take care not to drop the glass inside the door.