ZDX V6-3.7L (2010)
Hood Insulator / Pad: Service and Repair
Hood Insulator Replacement
NOTE:
-
Have an assistant help you when removing and installing the hood insulator.
-
Take care not to scratch the hood.
1. Remove the hood support strut See: Hood Shock / Support/Service and Repair.
2. While an assistant supports the hood, detach the clips with a clip remover. Remove the hood insulator (A) by pulling it away from the hooks (B).
3. Install the insulator in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clips and the hooks into place securely.
