ZDX V6-3.7L (2010)
^
Remove the Duo-Pak cartridge cap; expel a small amount of adhesive, making sure both sides of the Duo pak cartridges are flowing evenly
and freely.
^
Attach the EPX mixing nozzle to the Duo-Pak cartridge.
^
Begin dispensing the adhesive.
4. Apply an even coat of adhesive to the bonding surface of the retainer.
NOTE:
Clean the retainer bonding surface with isopropyl alcohol and let it dry before applying the adhesive.
*5. RL Only: Position the retainers on the A-pillar in the same location as the original retainers. Then line up the retainers with the alignment marks on
the body.
