ZDX V6-3.7L (2010)
Passenger Assist Handle: Service and Repair
Grab Handle Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
-
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
1. Lower the grab handle (A), then insert a small flat-tip screwdriver into the notch.
2. Pull on the small flat-tip screwdriver with the appropriate trim tool (A), and remove the cap (B).
3. Pinch the clips (A) to release the hooks (B), then remove the grab handle (C).