ZDX V6-3.7L (2010)
Trim Panel: Service and Repair
A-Pillar Corner Trim Replacement
A-Pillar Corner Trim Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Take care not to scratch the trim or the body.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Open the front door.
2. Carefully insert a trim tool next to the upper clip, then detach the clip by prying on the A-pillar corner trim (A).
3. Detach the remaining lower clips with a trim tool, then remove the A-pillar corner trim (A).