ZDX V6-3.7L (2010)
Sun Shade: Overhaul
Panoramic Glass Roof Sunshade Drive Assembly Disassembly/Reassembly
-
Take care not to scratch the sunshade track.
-
A sunshade and an opposite one should be replaced with a new pair at the same time.
-
Even if the old sunshade is to be reused, the push shoes and the pull shoes should be replaced with new ones.
1. Remove these items:
-
Roll blinds See: Removal and Replacement/Panoramic Glass Roof Sunshade Roll Blind Removal/Installation
-
Mechanism track covers/glass rear covers, both sides See: Sunroof / Moonroof Interior Trim Panel/Service and Repair
2. Slide the push shoes (A) and the pull shoes (B) rearward then remove the shoes from the track (C).
3. Remove the inner cable (A) from the sunshade track (B).
4. Remove the TORX screws with a T25 TORX bit and pull the sunshade tracks (A) rearward, then remove the sunshade track from the sunshade
drive (B).
