ZDX V6-3.7L (2010)
Sun Shade: Removal and Replacement
Panoramic Glass Roof Sunshade Roll Blind Removal/Installation
Panoramic Glass Roof Sunshade Roll Blind Removal/Installation
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, and the precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or service.
-
Take care not to scratch the sunshade track, or the related parts.
-
A blind and an opposite one should be replaced with a new pair at the same time.
1. Open the blind half way.
2. Remove the headliner See: Interior Moulding / Trim/Headliner/Service and Repair.
3. Remove the lower crossmember See: Panoramic Glass Roof Sunshade Frame Lower Crossmember Replacement.
4. Turn the edges of the blinds (A) over 90 °, then remove them from the shoes (B).
5. Remove the spacers (A) from the end of the blind shafts (B).
6. Slide the blinds (A) against the sunshade track (B) to release the ends of the blind shafts (C) from the sunshade track.
