ZDX V6-3.7L (2010)
Sunroof / Moonroof Motor: Service and Repair
Panoramic Glass Roof Drive Assembly Replacement
Panoramic Glass Roof Drive Assembly Replacement
SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, and the precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or service.
NOTE:
-
Put on gloves to protect your hands.
-
Take care not to scratch the interior trim or the body, or tear the seat covers.
1. Remove the headliner See: Interior Moulding / Trim/Headliner/Service and Repair.
2. Remove these items:
-
Moving glass panel See: Sunroof / Moonroof Panel/Service and Repair
-
Panoramic glass roof control unit/motor See: Panoramic Glass Roof Motor Replacement
-
Sunshade drive assembly See: Sun Shade/Service and Repair/Removal and Replacement/Panoramic Glass Roof Sunshade Drive Assembly
Replacement
-
Grab handle brackets, both sides See: Restraint Systems/Air Bag Systems/Air Bag/Service and Repair/Removal and Replacement/Side Curtain
Airbag Replacement
3. Remove the TORX screws with a TORX T25 bit, and release the hooks (A), then remove the glass drive assembly (B).
4. Install the glass drive assembly in the reverse order of removal.
5. Reset the panoramic glass roof control unit See: Testing and Inspection/Programming and Relearning.