ZDX V6-3.7L (2010)
Sunroof / Moonroof Motor: Service and Repair
Panoramic Glass Roof Motor Replacement
Panoramic Glass Roof Motor Replacement
NOTE: Put on gloves to protect your hands.
Panoramic glass roof control unit/motor
1. Remove the headliner See: Interior Moulding / Trim/Headliner/Service and Repair.
2. Disconnect the panoramic glass roof control unit/motor connector (A), and remove the TORX screws with a T25 TORX bit, then remove the
panoramic glass roof control unit/motor (B).
3. Install the motor in the reverse order of removal, and note these items:
-
Make sure the panoramic glass roof control unit/motor connector is plugged in properly.
-
Reset the panoramic glass roof control unit See: Testing and Inspection/Programming and Relearning.
-
Check the motor operation.
Power sunshade control unit/motor
4. Remove the headliner See: Interior Moulding / Trim/Headliner/Service and Repair.
5. Disconnect the power sunshade control unit/motor connector (A), and remove the TORX screws with a T25 TORX bit, then remove the power
sunshade control unit/motor (B).
