ZDX V6-3.7L (2010)
8. Slip the front edge of the side seal between the front fixed glass panel (C) and the housing (D), then pull the seal toward the windshield (E). Slip
the rear edge of the seal between the rear fixed glass panel (F) and the housing, then pull the seal toward the upper rear window (G).
9. Push the side seal (A) against the housing (B) and the body with a plastic spatula from end to end.
10. Carefully pull the entire adhesive backings (A) away while pulling up the edge of the side seal (B).
NOTE: Take care not to tear off the adhesive backings and leave any of the adhesive backing on the seal.
