ZDX V6-3.7L (2010)
5. Clean the housing bonding surface with a shop towel dampened in isopropyl alcohol. After cleaning, do not allow oil, grease, and water to contact
on the clean surface.
6. Apply a light coat of the body primer to the attaching surface of the housing (A) with a nozzle. Let the body primer dry for at least 10 minutes:
-
Do not apply glass primer.
-
Attach the side seal within 30 minutes after applying the body primer.
7. Fold the adhesive backings (A) at each end on a new side seal (B) around the moving glass panel opening.