ZDX V6-3.7L (2010)
4. Pull out the short flex cable (A) from the worm gear (B) in the outer seat track.
5. Install the slide motor in the reverse order of removal, and note these items:
-
Apply multipurpose grease to the worm gear areas in both seat tracks.
-
Install the short flex cable to the slide motor before installing the slide motor to the slide motor bracket.
-
Make sure both seat tracks are all the way forward before installing the slide motor bracket on the tracks. Install the short flex cable to the slide
motor.
-
Make sure the short flex cable and the flex cable are connected properly.
-
Make sure the motor connector is plugged in properly.
-
Check the front seat slide operation.
