ZDX V6-3.7L (2010)
Power Seat Motor: Testing and Inspection
Power Lumbar Support Motor Test
Power Lumbar Support Motor Test
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or servicing.
1. Remove the front seat-back cover, and seat-back cover/pad See: Seat Cover/Service and Repair/Front Seat-Back Cover Replacement.
2. Disconnect the 2P connector (A) from the lumbar support motor (B).
3. Test the motor by applying battery power and body ground to the terminals.
4. If the motor does not run or fails to run smoothly, replace it See: Service and Repair/Front Seat Lumbar Support Replacement.