ZDX V6-3.7L (2010)
Power Seat Motor: Testing and Inspection
Front Passenger's Power Seat Motor Test
Front Passenger's Power Seat Motor Test
NOTE: SRS components are located in this area. Review the SRS component locations See: Restraint Systems/Air Bag Systems/Locations, precautions
and procedures See: Interior Moulding / Trim/Dashboard / Instrument Panel/Air Bag(s) Arming and Disarming/Service and Repair before doing repairs
or servicing.
1. Remove the front passenger's seat See: Service and Repair/Front Seat Removal/Installation.
2. Disconnect the connector from each power seat motor.
NOTE: All connectors are terminal side of male terminals.
3. Test each motor by connecting power and ground according to the table. When the motor stops running, disconnect battery power immediately.