ZDX V6-3.7L (2010)
10. Release the hook strips (A) fastening the seat cushion cover (B) on the seat cushion pad.
11. Pull back the edge of the seat cushion cover (A) all the way around, and release the clips (B), then remove the seat cushion cover.
12. Install the cushion cover in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
To prevent wrinkles when installing a seat cushion cover, make sure the material is stretched evenly over the pad before securing the clips, the
hooks, and the hook strips.
-
Replace any clips (A) you removed with new ones.
