ZDX V6-3.7L (2010)
Seat Cover: Service and Repair
Rear Seat Cushion Cover Replacement
Rear Seat Cushion Cover Replacement
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857
NOTE:
-
Take care not to tear or damage the seat covers.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the seat cushion See: Service and Repair/Rear Seat Removal/Installation.
2. From the back of the seat cushion (A), release all the upholstery rings (B) and the hooks (C), then fold back the seat cushion cover.
3. Pull back the edge of the seat cushion cover (A) all the way around, and release the upholstery rings (B), then remove the seat cushion cover.
4. Install the cushion cover in the reverse order of removal, and note these items:
-
To prevent wrinkles when installing the seat cushion cover, make sure the material is stretched evenly over the pad before securing the
upholstery rings.
-
Replace all of the upholstery rings (A) fastening the seat cushion cover (B) to the pad wires (C) with new ones using commercially available
upholstery ring pliers (D).