ZDX V6-3.7L (2010)
Brake Rotor/Disc: Service and Repair
Front Brake Disc Replacement
Front Brake Disc Replacement
NOTE: Keep grease away from the brake disc and the brake pads.
1. Raise and support the vehicle See: Maintenance/Vehicle Lifting/Service and Repair.
2. Remove the front wheel.
3. Remove the brake hose bracket mounting bolt (A).
4. Remove the brake caliper bracket mounting bolts (B), then remove the caliper assembly (C) from the knuckle. To prevent damage to the caliper
assembly or brake hose, use a short piece of wire to hang the caliper assembly from the undercarriage. Do not twist the brake hose excessively.
5. Remove the brake disc flathead screws (A).
6. Remove the brake disc (B) from the hub bearing unit.
