ZDX V6-3.7L (2010)
NOTE: If the brake disc is stuck to the hub bearing unit, thread two 8 x 1.25 mm bolts (C) into the brake disc to push it away from the hub bearing unit.
Turn each bolt 90 degrees to prevent the brake disc from binding.
7. Install the brake disc in the reverse order of removal.
NOTE: Before installing the brake disc, clean the mating surfaces between the hub bearing unit and the inside of the brake disc.
8. Inspect the brake disc runout See: Testing and Inspection/Front Brake Disc Inspection.
9. Clean the mating surfaces between the brake disc and the inside of the wheel, then install the front wheel.