ZDX V6-3.7L (2010)
Parking Brake Cable: Service and Repair
Parking Brake Cable Replacement
Exploded View
NOTE:
-
The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature cable failure.
-
Refer to the Exploded View as needed during these procedure.
Front Parking Brake Cable Replacement
1. Release the parking brake pedal.
2. Remove the driver's side front door sill trim and the kick panel See: Body and Frame/Interior Moulding / Trim/Scuff Plate/Service and Repair.
3. Remove the footrest See: Body and Frame/Interior Moulding / Trim/Carpet/Service and Repair.
4. Remove the center console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Removal and Replacement/Center
Console Removal/Installation.
5. Pull back the carpet from the driver's footwell to access the parking brake cables.
6. Disconnect and remove the return spring (A).