ZDX V6-3.7L (2010)
Parking Brake Shoe: Procedures
Parking Brake Shoe Lining Break-in
WARNING
Do this operation in a safe area.
NOTE:
-
Do the brake lining surface break-in when replacing shoes with new brake linings and/or new rear brake disc/drum.
-
Check the number of parking brake lever clicks. Adjust the parking brake before lining surface break-in See: Adjustments.
1. Park the vehicle on a firm, level surface.
2. Release the parking brake pedal.
3. Press the parking brake pedal 5 clicks.
4. Drive the vehicle for 0.25 mile (400 m) at about 31 mph(50 km/h).
5. Stop the vehicle, and release the parking brake for 5-10 minutes to allow the brake disc/drum to cool.
6. Repeat steps 3 through 5 two more times.
7. Check the parking brake pedal adjustment See: Adjustments.
