ZDX V6-3.7L (2010)
Vacuum Brake Booster: Service and Repair
Brake Booster Replacement
1. Remove the air cleaner See: Engine, Cooling and Exhaust/Engine/Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and
Repair.
2. Remove the master cylinder See: Hydraulic System/Brake Master Cylinder/Service and Repair.
3. Remove the brake lines (A) from the VSA modulator-control unit (B).
4. Disconnect the brake booster vacuum hose (C) from the brake booster.
5. Remove the driver's dashboard undercover See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Driver's Dashboard Undercover Removal/Installation.
6. Remove the lock pin (A) and the clevis pin (B), then disconnect the clevis from the brake pedal.
7. Remove the brake booster mounting nuts (C).
8. Remove the brake booster (A) from the engine compartment.
NOTE:
-
Be careful not to damage the brake booster mounting surfaces and the threads on the booster studs.
