ZDX V6-3.7L (2010)
12. Remove the other parts from the radiator.
13. Install the radiator in the reverse order of removal. Make sure the upper and lower cushions are set securely.
14. Install the battery base See: Engine/Service and Repair/Engine Installation.
15. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
16. Refill the transmission with ATF See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Procedures/ATF Level
Check.
17. Fill the radiator with engine coolant, and bleed the air from the cooling system See: Coolant/Service and Repair.
18. Clean up any spilled engine coolant.
