ZDX V6-3.7L (2010)
2. Remove the bulkhead cover See: Body and Frame/Grille/Service and Repair/Front Bulkhead Cover Replacement.
3. Do the battery removal procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
4. Remove the battery base See: Engine/Service and Repair/Engine Removal.
5. Disconnect the radiator fan motor connector (A), the engine coolant temperature (ECT) sensor 2 sub harness connector (B), and the ECT sensor 2
connector (C), then remove the harness clamp (D).
6. Disconnect the upper radiator hose (E).
7. Remove the radiator fan shroud assembly (A).
8. Remove the harness clamp (B) and the wire harness (C).
9. Disassemble the radiator fan shroud assembly.
