ZDX V6-3.7L (2010)
5. Install the harness clamp (B), then connect the ECT sensor 2 connector (C), the ECT sensor 2 sub harness connector (D), and the radiator fan
motor connector (E).
6. Install the battery base See: Engine/Service and Repair/Engine Installation.
7. Do the battery installation procedure See: Starting and Charging/Battery/Service and Repair/Removal and Replacement.
8. Install the bulkhead cover See: Body and Frame/Grille/Service and Repair/Front Bulkhead Cover Replacement.
9. Fill the radiator with engine coolant, and bleed the air from the cooling system See: Coolant/Service and Repair.
10. Clean up any spilled engine coolant.
