ZDX V6-3.7L (2010)
Air Register: Service and Repair
Dashboard Vent Removal/Installation
Special Tools Required
-
KTC Trim Tool Set SOJATP2014
*Available through the Acura Tool and Equipment Program; call 888-424-6857
Driver's side vent
NOTE:
-
Take care not to scratch the dashboard or the related parts.
-
Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.
1. Remove the driver's dashboard trim See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Driver's
Outer Dashboard Trim Removal/Installation.
2. Pry up the bottom edge of the side vent (A) to detach the clips, then remove the side vent.
3. Install the side vent in the reverse order of removal, and note these items:
-
If the clips are damaged or stress-whitened, replace them with new ones.
-
Push the clip into place securely.
Passenger's side vent
NOTE: Take care not to scratch the dashboard.
1. Remove the passenger's dashboard panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Passenger's Dashboard Trim Panel Removal/Installation.
2. Remove the screw, and pry up the bottom edge of the side vent (A) to detach the clips, then remove the side vent.
