ZDX V6-3.7L (2010)
Low Fuel Lamp/Indicator: Testing and Inspection
Low Fuel Indicator Test
1. Do the gauge self-diagnostic test See: Instrument Cluster / Carrier/Testing and Inspection/Initial Inspection and Diagnostic Overview.
-
If the low fuel indicator flashes, go to step 2.
-
If the low fuel indicator does not flash, replace the gauge control module See: Instrument Cluster / Carrier/Service and Repair.
2. Check for body electrical system DTCs.
-
If any DTCs are indicated, do the indicated DTC's troubleshooting.
-
If no DTCs are indicated, go to step 3.
3. Do the fuel gauge sending unit test See: Fuel Gauge Sender/Testing and Inspection.