ZDX V6-3.7L (2010)
11. Install the ATF filler bolt (B) and a new sealing washer (C).
12. Remove the ATF dipstick (A).
13. Make sure the fluid level is between the upper mark (B) and the lower mark (C) on the dipstick, then insert the dipstick back into the dipstick
guide tube.
14. Install the engine undercover.
15. Install the intake air duct See: Transmission and Drivetrain/Automatic Transmission/Transaxle/Service and Repair/Removal and
Replacement/Automatic Transmission Installation.
16. Install the air cleaner See: Filters/Air Cleaner Housing/Service and Repair.
17. If the maintenance minder required to replace the ATF, reset the maintenance minder See: Service Reminder Indicators/Maintenance Required
Lamp/Indicator/Description and Operation, and this procedure is complete. If the maintenance minder did not require you to replace the ATF, go
to step 18.