ZDX V6-3.7L (2010)
NO -
Go to the SRS general troubleshooting information See: Restraint Systems/Air Bag Systems/Testing and Inspection/Reading and Clearing Diagnostic
Trouble Codes.
8. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
9. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the VSA indicator.
Does the VSA indicator come on and go off?
YES -
Go to step 24.
NO -
Go to the VSA system symptom troubleshooting for ABS indicator, brake system indicator, VSA indicator do not go off See: Brakes and Traction
Control/Antilock Brakes / Traction Control Systems/Testing and Inspection/Symptom Related Diagnostic Procedures/ABS Indicator, Brake System
Indicator, and VSA Indicator Do Not Go Off/Symptom Troubleshooting.
10. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
11. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the SH-AWD indicator.
Does the SH-AWD indicator come on and go off?
YES -
Go to step 24.
NO -
Go to the SH-AWD system symptom troubleshooting for SH-AWD indicator does not go off, and no DTCs are stored See: Transmission and
Drivetrain/Differential Assembly/Testing and Inspection/Symptom Related Diagnostic Procedures/The SH-AWD Indicator Does Not Go Off, and No
DTCs Are Stored/Symptom Troubleshooting.
12. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
13. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the TPMS indicator.
Does the TPMS indicator come on and go off?
YES -
Go to step 24.
NO -
Go to the TPMS symptom troubleshooting for TPMS indicator does not go off, and no DTCs are stored See: Instrument Panel, Gauges and Warning
Indicators/Tire Monitoring System/Testing and Inspection/Symptom Related Diagnostic Procedures/TPMS Indicator Does Not Go Off, and No DTCs
Are Stored.
14. Turn the ignition switch to LOCK (0), or press the engine start/stop button to select the OFF mode.
15. Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and watch the immobilizer indicator.
Does the immobilizer indicator stay on or flash?
YES -
Go to the immobilizer system's troubleshooting:
-
With keyless access See: Accessories and Optional Equipment/Antitheft and Alarm Systems/Keyless Entry/Testing and Inspection/Symptom
Related Diagnostic Procedures/Keyless Access System Symptom Troubleshooting Information.
