ZDX V6-3.7L (2010)
4. Install the passenger's dashboard ducts (A) with the screw.
NOTE: Make sure the passenger's dashboard ducts are connected securely.
5. Install the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Glove Box Removal/Installation.
6. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
7. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
8. After installing the front passenger's airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop
button to select the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.