ZDX V6-3.7L (2010)
4. Reinstall the seat-back cover/pad in the reverse order of removal See: Body and Frame/Seats/Seat Cover/Service and Repair/Front Seat-Back
Cover Replacement.
5. Install the front seat back panel See: Body and Frame/Seats/Seat Cover/Service and Repair/Front Seat-Back Cover Replacement.
6. Install the clips (A) and harness holder (B) of side airbag harness to seat cushion frame.
7. Install the front seat See: Body and Frame/Seats/Service and Repair/Front Seat Removal/Installation.
8. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
9. Move the front seat and the seat-back through their full ranges of movement, making sure the harness are not pinched or interfering with other
parts.
10. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
11. After installing the side airbag, confirm proper system operation: Turn the ignition switch to ON (II), or press the engine start/stop button to select
the ON mode, and check that the SRS indicator comes on for about 6 seconds and then goes off.