ZDX V6-3.7L (2010)
Installation
1. Before installing the steering wheel, make sure the front wheels are aligned straight ahead.
2. If not already done, disconnect the negative cable from the battery, then wait at least 3 minutes.
3. Set the turn signal canceling sleeve (A) so that the projections (B) are aligned vertically.
4. Carefully install the cable reel (A) on the steering column shaft. Then connect the cable reel connector A (20P) (B) on the dashboard wire harness
and cable reel connector B (4P) (C) on the dashboard wire harness to the cable reel.