ZDX V6-3.7L (2010)
5. Install the upper and lower column covers See: Steering and Suspension/Steering/Steering Column/Steering Column Cover/Service and Repair.
6. Before installing the steering wheel, make sure the front wheels are pointing ahead, then center the cable reel (A). Do this by first rotating the
cable reel clockwise until it stops. Then rotate it counterclockwise (about three turns) until the arrow mark (B) on the cable reel label points
straight up.
7. Position the two tabs (A) of the turn signal canceling sleeve (B) as shown, and install the steering wheel on to the steering column shaft, making
sure the steering wheel hub (C) engages the pins (D) of the cable reel and tabs of the turn signal canceling sleeve. Do not tap on the steering wheel
or steering column shaft when installing the steering wheel.
