ZDX V6-3.7L (2010)
2. Left side; install the intake air resonator (A) with the mounting bolts (B).
NOTE: Make sure the intake air resonator are connected securely.
3. Do the battery terminal reconnection procedure See: Starting and Charging/Battery/Service and Repair/Procedures.
4. Clear any DTCs with the HDS See: Testing and Inspection/Reading and Clearing Diagnostic Trouble Codes.
5. Confirm proper SRS operation: Turn the ignition switch to ON (II), or press the engine start/stop button to select the ON mode, and check that the
SRS indicator comes on for about 6 seconds and then goes off.
6. Reinstall all removed parts.
